For use with microprocessor-based medical equipment requiring conformance with UL60601 and IEC60601
Some medical systems have special power protection needs. Systems such as patient monitors imaging equipment and various computer systems used within the "patient vicinity" require special safety precautions and POWERVAR conditioners ...
Some medical systems have special power protection needs. Systems such as patient monitors, imaging equipment, and various computer systems used within the "patient vicinity" require special safety precautions and POWERVAR conditioners are the perfect prescription.
POWERVAR medical conditioners not only protect systems used for patient care, they are also built to meet the safety requirements of IEC60601. All deliver clean, conditioned power and are safety agency listed.
North American models listed to listed to UL60601-1 and cUL 22.2 NO. 60601
International models listed to listed to IEC60601 and CE listed
For patient safety, leakage current is less than 300 µA
Red LED (amber for international models) warns if the hospital`s AC outlet is missing its safety ground
All plugs and receptacles are hospital grade (North American)
On international models only, versions are available with the output neutral not bonded to ground. Contact factory for information.
Let-through voltage is <10 volts normal mode and < .5 volts neutral to ground when tested to ANSI/IEEE C62.41
Suitable for protecting computers, analyzers, instrumentation and patient monitors up to 16 A
Like all POWERVAR equipment, these conditioners are backed by our five-year parts and labor warranty